Hey friends!
Welcome back to the blog and back to our Christmas posts!
In this post, we’re going to be looking at some great stocking fillers and Christmas gift ideas from my friends over at Extreme Airsoft. So even if you don’t know anything about airsoft but your girlfriend, boyfriend, relative or teammate is into it and you need some guidance or if you're an airsofter yourself and you just need some ideas - I’ve got you, there's something on this list for every budget!
STOCKING FILLERS
The Acetech Bifrost Tracer Unit is a tracer unit that is unlike any other tracer we’ve seen in airsoft so far. We’ve all seen red and green tracers, but until now, we’d not seen a tracer unit capable of giving us a rainbow! Yes, you did just read that correctly! The Bifrost from Acetech is designed to not only simulate muzzle flash with a multi-colour flame effect but also provide us with a rainbow BB flight path. Check out my full review here!
The Neutron from Tectonic Innovations is a single-shot impact grenade designed for airsoft. It is crafted from Stainless steel and aircraft-grade Aluminium for longevity and durability. Like its big brother, it also uses a 209 primer as its munition. It has a ‘twist to safe’ mechanism and locking pins for the fire and safe positions. The new Neutron can be holstered in any 40mm pouch or a Deadly Customs holster. The new version of the Neutron is available in the same colours as the original - black, red, orange, blue and purple but instead of having a grey base, it has a colour-matched base. You can check out my full review here
This is the AIM-O RD-2 Red Dot with QD Mount Black. It is a T2-style Red Dot Sight. The T2 is the successor of the T1 and has the same look and feel. The main change compared to the T1 is that especially the lenses are protected by 2 caps when the scope is not used. The strength of the reticle can be adjusted in 11 steps. This Version comes attached to a CQ high riser and can be adjusted easily for windage and elevation. The T2 can also be mounted onto a tall mount by using the 4 screws located on the bottom of the low mount.
The PTS® Enhanced Polymer Magazine, or EPM for short, is a new type of Mid-capacity Polymer Magazine for AEGs. The EPM is a truly unique AEG mag, inside and out. Externally it features a Dupont Zytel Polymer shell, with recessed panels for better grip, and unique magazine well guides that reduce snagging when the mag is drawn from and reinserted into pouches.
The bullet window with the fake 556 rounds isn’t just for show. When the mag is fully loaded, at the base of the see-through bullet window, an orange follower comes into view. This is a remarkable design feature unique to the EPM as it allows the end user to pick up any EPM magazine and immediately know if the mag is filled to capacity and ready to go. It also acts as a visual indicator for the user to know when to stop loading the mag.
Another notable feature of the EPM 150RDS AEG ENHANCED POLYMER MAGAZINE BLACK – PTS is the base plate. The bottom of the base plate has been designed with an angled surface and a rubber overmold on the lower face. This combination of features allows the end user to rest the gun on any flat shooting platform and have more surface contact with better traction and therefore greater stability. The angled surface is minimized to the point that it is functional, yet still comfortable in the hand when drawn from pouches and also not inhibit the closure of flaps on closed-top mag pouches. The base plate has also been designed with a ribbed ledge which promotes easier extraction of the mag from deep mag pouches and can help the end user with correctly indexing the mag.
Nuprol speedloaders aid to quickly fill Mid-Cap magazines, GBB pistol & rifle magazines, moscarts, shotgun shells and more. Simply fill up the reservoir and push down on the plunger to feed the BB’s.
CHRISTMAS GIFTS
The KO: EVE-9 AEG, the longest variant in the KO EVE line of replicas, was intended to rival the KWA T10 but without the kickback of KWA’s recoil system. Externally, at the front of the rifle, we have a KWA SOCOM Muzzle Brake and a K.O.R.E 9 MLOK rail that has plenty of space for attachments such as torches, lasers, the upper and lower receiver are both polymer and have all the controls we would expect to see on a typical M4 system including the mag release and the ambidextrous fire selector that has safe, semi and full-auto modes. It also has the new KO’s slimline pistol grip. At the back of the rifle, we have a PTS EPS (Enhanced Polymer Stock) that houses the battery (and it has plenty of space which we love to see!). Read the full review here
The pre-order for the SILENCERCO MAXIM 9 GBB is live! it is a faithful representation of its real steel counterpart and includes fully licensed SILENCERCO furnishings and trademarks.
Premium materials feature throughout the Krytac Maxim 9 GBB Airsoft Pistol design, such as 6061-T6 aluminium and reinforced polymers, lend to a robust and lightweight GBB, that is manoeuvrable in close quarters and can also withstand the abuse of uptempo gameplay.
Due to it’s modular design, the gun allows the user to customise the length to their own individual preferences as well as the ability to utilise a Tracer unit. The tracer unit available end of December.
The Nuprol Large Hard Case is exactly what it says on the tin - a large, hard rifle case designed to carry (or store) and transport Airsoft guns to and from games safely. Feel free to check out the full review here
The Pirahna SL from G&G is an in-house pistol design, built and made by G&G to feature their new Gas System to increase gas efficiency.
The SL has a full alloy slide that is ported that reveals a silver-fluted outer barrel that sits on top of the polymer frame. The frame has a wide trigger guard and a textured pistol grip to make it more comfortable for the end-user and there is also a lower front rail that can be used for attachments such as torches or lasers. The split slide design, where only the rear half of the slide moves backwards, means less force is required to cycle the pistol as the weight of the moving parts has been heavily reduced. Other features include a large magazine release, an ambidextrous slide release and a trigger lock push-button safety on the trigger itself.
The KWA RONIN 47 is KWA’s answer to the tactical AK. It has a 7″ MLOK handguard, a Gen. 2 PDW ‘Tanker’ stock, the new “Cutter” muzzle brake and a paddle-style magazine release. The rail and upper receiver are metal, and the lower receiver is an Aluminium mix. It also has the PTS Enhanced Polymer Grip and the Enhanced Back-Up Ironsights. It looks sleek in all black. Read the full review here!
Post sponsored by Extreme Airsoft
No comments